Norseman™ Drill & Tool Logo

Standard & Spiral Flute Bridge Reamers

America´s Finest High–Speed Cutting Tools™

PRODUCT CATALOG >> HSS Straight

Type 54-AG HSS Bridge Reamers Straight Flute
    HSS Bridge Reamer Straight Flute Type 54-AG

Type 55-AG HSS Bridge Reamers Spiral Flute
    HSS Bridge Reamer Spiral Flute Type 55-AG
    Bridge reamer are available in both straight and spiral flute configuration and are designed for heavy-duty reaming as encountered in the fabrication of structural steel assemblies, bridge erection, and ship construction.

    The cutting end of the flutes is tapered, allowing the reamer to enter
    overlapping     and badly misaligned holes.

    The tapered design permits the reamer to enter out–of–line holes often
    encountered in structural work.

    Proudly manufactured in the USA
              with globally sourced material
    Adobe Acrobat PDF Download: PDF

 


Norseman Drill reamers should be ran at 1/2 the R.P.M. suggested for a corresponding twist drill size.

Coolant feeding reamers: Coolant
OR cutting tool lubricant induced thru the reamer should be utilized when possible. Benefits include better finishes, superior tool life and the ability to increase speeds and feeds.

All tools are constructed with left-hand spiral and right-hand cut. The left-hand spiral eliminates the tendency of the reamer to pull itself into the holes.

DRILL, REAMER & TAP Products —

18 pc. Spiral Point, NC Tap & Drill Set - Norseman Drill
CN-TECH™ Cryogenic Nitrided HSS Products Set
Taper Pipe Taps - Regular & Interrupted - Norseman Drill and Tool
CAR Reamers Fast Spiral 3-Flats on Shank - Norseman Drill
High Performance Reduced Neck Spiral Point Gold Oxide, Titanium Nitride, Titanium Carbon Nitride, Titanium Aluminum Nitride
Left Hand Heavy Duty Jobber Length - Norseman Drill and Tool
10pc Screw and Bolt Extractor Set - Norseman Drill and Tool
Ultra Bit™ Multi-Diameter 3-flats on Shank - Norseman Drill
29pc. Blaze Orange Ultra Dex 135° Split Point NAS 907B Jobber Length - Norseman Drill