Carbide Tipped Hole Cutters

Carbide Tipped Holecutter
Cuts up to 3/16" – Type CHC-AG

The design provides clean, crisp cuts without burrs
and prevents over peneration.

Built–in ejector spring & pilot drill.

Ultra–hard tungsten carbide teeth.

3–Flatted shank for keyless chucks.

Cuts 3 times faster than bi-metal hole saws.
 Download: PDF

Deephole Carbide Tipped Holecutter
Cuts up to 1" – Type CHD-AG

The built–in pilot drill with ejector spring quickly discharges
the slug effortlessly.

Built–in ejector spring & pilot drill.

Ultra–hard Tungsten carbide teeth.

3–Flatted shank for keyless chucks.

Easily produce overlapping & interrupted holes.
 Download: PDF

Carbide Tipped Holecutter — 1/4" Quick Release Type CHC-QR
Cuts 3 times faster than Bi–metal hole saws.

Ultra–hard Tungsten carbide teeth.

Made with Ultra-hard tungsten carbide teeth for
cutting through tough alloys.

Easily produce overlapping & interrupted holes.
 Download: PDF

4pc. / 5pc. CHC-AG & CHD-AG Carbide Tipped Holecutters Sets

Type CHC-AG
Cuts up to 3/16" Thin Material:
HC-4B – ( 11/16", 13/16", 15/16", 1-1/16" )

HC-4A – ( 5/8", 3/4", 7/8", 1" )

HC-5C – ( 7/8", 1-1/8", 1-3/8", 1-3/4", 2" )

• CHC-AG individual Sizes Available 9/16" to 5"


Type CHD-AG
Cuts up to 1" Thick Material:
HCD-4B – ( 11/16", 13/16", 15/16", 1-1/16" )

HCD-4A – ( 5/8", 3/4", 7/8", 1" )

HCD-5C – ( 7/8", 1-1/8", 1-3/8", 1-3/4", 2" )

HCD-5PL – ( 5/8", 3/4", 7/8", 1", 1-1/8" )

• CHD-AG individual Sizes Available 5/8" to 2"
 Download: PDF

3pc. CHC-AG Carbide Tipped Holecutters Set

Ideal for stainless steel, structural steel studs and electrical boxes.

Can be used on cast iron, brass, aluminum and other thin non–ferrous metals.

Sizes: 7/8", 1-1/8" and 1-3/8" ( For material Up to 3/16")
 Download: PDF